Heating Treatment
OVERVIEW
Heating Service
Heating is essential for every building in Canada. As different boilers for process or heating require specific maintenance needs. Our trained professionals will provide an extensive and thorough analysis of your system and come up with advanced solutions to deal with all your issues.
OVERVIEW
Heat Problem Solution
A well-balanced internal and external boiler water treatment program addresses all of the potential problems associated with boilers, including:
The control or removal of calcium and magnesium hardness through external (mechanical) pretreatment or internal (chemical) treatment.
The maintenance of proper levels of sludge conditioners to ensure that any present or precipitated suspended solids remain fluid so they can be properly blown down.
The maintenance of appropriate levels of alkalinity to ensure that proper chemical reactions are allowed to occur.
The control of dissolved oxygen through external pretreatment or through the use of a suitable oxygen scavenger.
OVERVIEW
Causes Of Heat Problem
In a boiler, energy in the form of heat is transferred from a fuel source to the water across a heat transfer surface. When subjected to temperature and pressure, the composition of the boiler water undergoes radical changes. Solubility levels are exceeded, the effects of dissolved gases are magnified, and the efficiency of the heat-transfer process can be affected. The structural and functional capabilities of equipment may become compromised. Improperly maintained steam boilers could even explode in a piping hot blast of super heated steam.
Scale buildup, corrosion and pitting in boiler systems lead to efficiency losses. These processes may possibly allow dangerous steam build up, stressing weakened vessels, pipe components and parts, which may lead to blockage, perhaps even leading to devastating equipment failure, complete with an explosion of super heated steam.
Equipment failure of this type may cause property damage and loss of life.
With proper equipment installed, and with a properly scheduled program of complete maintenance procedures including water treatment and mechanical inspection, a blast of this kind would not likely happen.
Scale, corrosion, and pitting in boiler systems lead to dangerous and expensive efficiency losses.
